I don't know about the design of your hitch and mounting pins, but my PullRite has large nuts on the top side of the mounting pins (between the turning/locking arms and the upper surface of the base plate. When installing, the locking arms and mounting pins are rotated 1/8 - 1/4 turn loose, the large nuts are finger tightened against the hitch base plate, and then the turning/locking arms are rotated into their locking positions to tighten town the hitch to the truck. It's very snug with no movement or noise at all. Any significant movement could cause unnecessary wear of the parts and pucks.
Rob
