Adding a circuit to distribution panel
Well shortly after getting this all sorted in our last travel trailer, we just upgraded to a new to us Keystone Sprinter Campfire 5th wheel. While it’s pretty close to perfect for our needs, it unfortunately did not come with a single 12v or USB outlet!
There is a nice shelf under the TV which happens to be right above the fuse box with pretty easy routing through the cabinet. My plan is to make this shelf a “charging center” for topping up our devices while camping.
Correct me if I’m wrong but it looks fairly simple - hot goes to the empty space on the fuse panel and ground to the ground block. I’m planning on 2-3 USB outlets (3a) with one of which also having the built in voltmeter since I don’t have one on this rig.
Would a 15a fuse be sufficient?
Any other considerations or ideas while I’m in there?
There is a nice shelf under the TV which happens to be right above the fuse box with pretty easy routing through the cabinet. My plan is to make this shelf a “charging center” for topping up our devices while camping.
Correct me if I’m wrong but it looks fairly simple - hot goes to the empty space on the fuse panel and ground to the ground block. I’m planning on 2-3 USB outlets (3a) with one of which also having the built in voltmeter since I don’t have one on this rig.
Would a 15a fuse be sufficient?
Any other considerations or ideas while I’m in there?
