another my landing gear blows fuses thread
ok I will try not to get too long with this. given the fact the gear is all the way in (retracted) and rv is hooked on the truck (reg f250 diesel no lift kit). I lower the gear approx 8-10". (I need t...
Forum Discussion
laudy wrote:
Well picked up a new motor. That seems to do the trick. Ran the landing gear up and down as if I was simulating hooking and unhooking and leveling. Never popped the fuse. The motor never sounded like it was laboring at the tail end of the lift like the old motor did. Hope this was the answer.
One of the real no-no's with electric landing gear is to be sure NOT to run them to the stops on either end. That's when you really start breaking stuff, like shear pins, and stripping gears.
Lyle
