BAL Accu-Slide Frustations
All, I'm here mostly to vent about my problems, and looking for any feedback if you have had work done on your cable driven bedroom slide. I've got a 2017 3850RL that we took delivery of in June of 20...
Forum Discussion
Ok, so dealer fixed the slide. Caulk in the pulleys was not the problem. Seems factory adjusted the cables way to tight when it was in, and that stripped the gears out.
That said, water is still wicking into the trailer at that cable location. I found a drip hanging from that cable all the way in where it attaches to the adjustment block on the drive chain. I've emailed my dealer. I'm going to get my clothespin and try that too.
At my wit's end. Oh, and I still have water dripping from the pinbox area from my nose cap. Anyone seen that too?
Dave
That said, water is still wicking into the trailer at that cable location. I found a drip hanging from that cable all the way in where it attaches to the adjustment block on the drive chain. I've emailed my dealer. I'm going to get my clothespin and try that too.
At my wit's end. Oh, and I still have water dripping from the pinbox area from my nose cap. Anyone seen that too?
Dave
