Beef up (fish plate) “I” beam frame
Dealer told me some people have done this. Adding 10 or 12 feet of plate centred over axels. This should prevent rear frame sag which I think my 34 foot Cedar Creek has some of. Thoughts?
Forum Discussion
JRscooby wrote:
When welding frames I always clamp stands well past the area I'm working to pull a strings tight, then notch a sticks for gauge. Short weld, skip weld another place, other rail whatever, then come back, repeat...
Okay, read up a little on skip welding as they call it, still stitch welding, but its actually back welding for heat purposes , but then coming back , and actually seam welding or a complete weld, only for the purpose of heat distortion.
We did a lot of pre bow. Pre bow on base plates that required a seam weld was much easier to just put in an established pre bow , let the heat pull it back straight, instead of having to mess with a bunch of stopping ,and starting welds. Of course in these frame applications ,thats not possible .
