Checking on Wheel Bearing Heat
I was wondering how many of you check your hubs for overheating when you stop and get gas or pit stops. While driving home from Branson (232 miles total one way) I stopped for gas and two hubs wer...
Forum Discussion
I had problems with one hot drum on each side, two were over 250* and the other two were about 150* so I fixed the wiring to the brakes and then I jacked up one wheel at a time. I check for wobble and spun the wheel to make sure the bearings were okay and then I adjusted the shoes with the star adjusters. I shot about a half a tube of grease in each EZ Lube fitting and I could tell that the wheels spun easier. Got one side finished this morning before it got hot outside.
