Dometic RM3862 models
Hi, These refirgerator models are becoming obsolete and parts are a little tough to find. I replaced the bottom handle once and the top just broke. Luckily I was able to find one on amazon. The ...
Forum Discussion
joelc wrote:
Don't know anything about your fridge, but I had the same problem with my Norcold. The door fits into a pin on the base and on the top is a non load bearing pin. Don't know if you can do it, but cn you glue the other one together and reinforce it with some metal strips as I did? Mine has been working for about 2 yrs with this "temporary" home made fix. Of course 2 weeks ago the ammonia decided to leave the fridge and now I have to bury it. I am getting a 12V Dometic to replace it.
i ordered my current toyhauler with the 10 cu ft dometic 12v...... would never own another lp/elect rv fridge! i know many will disagree but there is no comparison between the two. there are 4 temp settings in the frdige itself. i had to turn ours down to setting 2 as setting 3 was so cold cans of soda started bulge and deform. slush turning to ice and getting ready to blo up. it was down to temp in less then 4 hrs vs 24 to 48 hrs. we did not need a 10 cu ft but that was the smallest we had to choose from. very happy with it.
