Dump valve replacement gone bad
I was mostly concerned about how to get a new dump valve in place with seals intact between two immovable objects until I tried to remove the faulty one, which I did not succeed. After removing the 4...
Forum Discussion
You will need to pry lightly on the fixed plumbing pipes.
To install a thin piece of sheet metal flashing material on each side of valve to slide it in. When in place slide sheet metal out. Coat metal with dish soap will make it easier to slide out.
What is all the gunk around inlet to the tank?
To install a thin piece of sheet metal flashing material on each side of valve to slide it in. When in place slide sheet metal out. Coat metal with dish soap will make it easier to slide out.
What is all the gunk around inlet to the tank?
