Easy way to tell what outlets are on my inverter?

valhalla360 wrote:
Is the fridge 120v AC or 12v DC?

120

Is the fridge 120v AC or 12v DC?

Most likely nothing except the fridge will be powered by the inverter installed to run the fridge.

We have one of the Furrion stainless steel cooktops and oven in our rig and it uses a battery in the little ignitor button.

My stove top uses a single AA battery for the burners.. To light the actual 'oven', you have to light the pilot and let it run, or just use the clicker on it to light the pilot. Oven won't fire without the pilot going as far as I know... Actually have never used it yet! ha, ha...

I pulled the AA battery for the burners because if you lean on it while reaching for the something in the upper cabinet, your hip pushes the button and engages the igniter.

I just use the good old 'clicker' lighter and works great! :)

Mitch

Is the stove not lighting because the battery disconnect switch is off?

K Charles wrote:
Unplug from shore power if the outlet works it's on the inverter.

^^^This

hotjag1 wrote:
Are you sure about your stove? I thought the ignitor would be 12 volt.

Yep I am sure. Lights work etc. No igniter on the stove. Thought it was very strange. And we had used the stove the same morning to make breakfast while still on shore power. I have not checked it on the inverter, but a spark igniter should be 12V I would think.

Are you sure about your stove? I thought the ignitor would be 12 volt.

Furrion stove is gas only other than the 12 volt lights for the backlighting