Thanks to all who responded-
Found the issue..
I have the 50amp inlet on the rear corner of my coach, the stock cord that came with was way too stiff.
I got a plug that went into the coach and had the 50amp male on the other end.. I then made a 40’’ cord out of SOO cord that is real flexible….
One leg at that plug was burnt up… I did not get too far into it yet, but I am assuming that since I made the cord, I didn’t tighten something….
I ran to Walmart and found a 30 amp RV cord that I plugged into the pedestal until I can get to an RV dealer tomorrow and get a new 50 amp cord