Cummins12V98 wrote:
Did you daisy chain your brake lines or did you make them equal length?
I used the line kit included with the conversion. The line runs from the pump to a "T" which feeds a "T" on the front axle and a "T" on the rear axle. The "T" on each axle feeds the respected left and right caliper on the each axle. The line from each axle "T" is shorter on the left side of each axle.
That is probably about as clear as mud without a picture. In short, the feed to each axle is daisy chained and not daisy chained from one caliper to the next.
Thanks