Front landing gear tip-adjustable foot
I use an adjustable landing gear foot on the landing gear that is closest to the up-down button for the landing gear-no shimming etc. Pull pin on opposite side lower til adequate-put pin back in-lo...
Forum Discussion
ontariofarmer wrote:
mileshuff's way will work......and it's what I do. I doesn't matter if one side is lower than the other, when you pull the pin the leg goes to the ground. The trailer will still lift and lower the trailer straight up and down.
If it bothers you that one leg is lower than the other, just put a few more blocks under it.
This is why i have an adjustable foot-i do not need to carry blocks.
If both legs are pinned and they do not hit the ground at the same time you are TWISTING the frame-not good.
