Help with MorRyde Pin Box
I wanted to post this to see if anyone else has had any problems with their MorRyde pin box. I have contacted MorRyde and sent them the same video that I have enclosed a link to in this post. I am c...
Forum Discussion
VoodooMedicineMan wrote:
you might take out the rubber plugs on top and see if the nuts on the rubber spring were not tightened enough and the bolt holes were elongated causing the fore and aft movement.
So far, that sounds like a possibility. Although, I don't recall seeing anything out of the ordinary when we removed the rubber shear spring to replace it with the new one. There is an awful lot of movement with such little momentum. Thanks, Phillip
