I have a set of Lippert Corp, Quick Draw beds that have been trouble free. Last trip while putting the beds up we heard a clunk sound while returning to the upright position. Nothing was caught so we assumed it was okay. Well its not.
It seems that the front right corner has skipped a link or something on the chain. The right corner is about an inch lower then the rest. The operation up and down is still just fine. I cannot for the life of me figure out how these beds even work. Does someone have some insight I hope. See pic below.
There is no way to open up the top rails and see if the chain is okay or not? Any other ideas would be helpful.
It seems that the front right corner has skipped a link or something on the chain. The right corner is about an inch lower then the rest. The operation up and down is still just fine. I cannot for the life of me figure out how these beds even work. Does someone have some insight I hope. See pic below.
There is no way to open up the top rails and see if the chain is okay or not? Any other ideas would be helpful.
