Forum Discussion
Randu
Apr 24, 2014Explorer
I took my 1 year old P3 from my 2004 truck and put it in my 2014 just in the last month. All wiring is under dash except you need to run a separate brake wire from the aftermarket controller to the 7 pin plug. If you don't already have a controller then the interface box is the way to go. Since my controller was so new and worked perfectly, I had the don't mess with success feeling.
I contacted Tekonsha and they e-mailed me TB0008 which showed me the correct wires under the dash and the correct steps to separate the IBC to prevent codes from flashing up on the driver information display.
Randu
I contacted Tekonsha and they e-mailed me TB0008 which showed me the correct wires under the dash and the correct steps to separate the IBC to prevent codes from flashing up on the driver information display.
Randu
About Fifth Wheel Group
19,007 PostsLatest Activity: Feb 26, 2025