Landing Gear Lubrication
I have a 2012 Keystone Cougar 323 MKS. The landing gear motor seems to be straining a good bit under load. Is there any good info on lubing the shaft/nut. Thank you.
Forum Discussion
My landing legs came with factory installed zerks, one on each leg, in the area of the lower one, in Old Biscuit's picture. It only takes about 2 pumps on the lever to grease.
I think the grease is applied right near the large nut, so grease is spread up/down, and through the nut. It made my leg operation easier, quieter, so yes, a noticeable difference.
Jerry
I think the grease is applied right near the large nut, so grease is spread up/down, and through the nut. It made my leg operation easier, quieter, so yes, a noticeable difference.
Jerry
