Pin Box Adjustment and Trailer Leveling???
My current setup has my trailer slightly nose-high. When I measure the clearance between my trailer and the bed rails I am right about 6 inches by the tailgate and the front of the trailer nose is ab...
Forum Discussion
Move the pin box and see what happens, I'd say try and keep a good fist width of clearance between tailgate and RV.
I've done all of the above over the years and I can say from experience, moving the pin box on some units can actually be more work than adding new u bolts and 2 inch lifting blocks to the RV springs. Takes about 30 minutes to kit the RV springs, 2 hours with beer.
I've done all of the above over the years and I can say from experience, moving the pin box on some units can actually be more work than adding new u bolts and 2 inch lifting blocks to the RV springs. Takes about 30 minutes to kit the RV springs, 2 hours with beer.
