Selecting MorRyde Pinbox bushing size
Getting ready to purchase one of these pinbox and see they can be ordered with different size rubber bushing depending on weight of the trailer. My 5er has a 12Klb GVWR and I'm trying to decide betwe...
Forum Discussion
N-Trouble wrote:
The MorRyde isn't designed to reduce hitch slop. If you have hitch slop it will be there regardless. Looking to soften/dampen some of the for/aft jarring that gets transmitted from 5er to TV due to the tight connection of the ball/coupler.
So in my opinion the for/aft push pull is caused by two things.
#1 Nose high attitude, the back axle has a harder time over bumps, and the equalizer can't really compensate for it. This results in a pull-push effect when that axle goes over a bump.
#2 Light pin, while stated OK with 15% to 25%, I feel the closer to 15% the more of a teeter-totter effect, and if nose high this is aggravated. Running at least a 20% pin weight will reduce the teeter-totter and result in a smoother ride.
