Wet bolts/Correct Track
Started installing wet bolts today and found that my correct track bolts are welded to the adjustment piece. Any ideas how to get a wet bolt in? Has anyone else had this and what did you do? Thought ...
Forum Discussion
I went ahead and took a side grinder and cut the weld out and got the bolt out. Ground plate flat and then turned it around and put it in the back and brought that plate up front. The wet bolt was correct length but didn't really dig into the front plate. I only did 1 of the 4 and left the other 3 as is until I can contact Lippert Monday. Your thought on the reason for the weld makes sense.
