I have a 2005 Fleetwood Bounder 32w. There is a toggle switch with the picture of a headlight right behind the controls for the levelers next to the driver's seat. I have looked in my manuals and looked on line and I can not find out what this toggle switch is supposed to do. Can anyone tell me what this switch controls? Thank you.

I beleive it might be for the fog lights, but for the fog lights to work, the head lights have to be ON and on low beams. Give it a try. The reason for headlights to be ON low beams is so you also have tail lights when using fog lights.

Thank you for the reply. I do not have fog lights. Do you think this is for fog light if you wanted to add them?

Could it be for daytime running lights?

MY '11 Bounder has a "ICC" switch about the same place. When you see truckers flash their lights after pulling back into the lane, after you flashed your lights, that maybe your switch. I think mine turns the back lights off when the headlights are "ON" and vice versa. Haven't used this switch yet on my "New To Me Bounder".

I will give it a try this weekend and see if in fact that is what the switch controls. Thanks for the information.

2005 Fleetwood Bounder 32w switch identify | Good Sam Community

eadeal55
Explorer
Sep 20, 2013
That switch is to "flash" your upper running lights. best way to tell if its working is turn on your lights and have someone rock the switch while standing outside (in a moderaterly dark condition). You'll see your upper red running lights in the back and upper yellow/orange running lights in the front "flash" as the switch is rocked.

Depending on how its wired, your full headlights might need to be on. Plus there is also a possibility that your headlights will also flash, but I've heard that flashing your headlights is illegal in some states, so the switch might not be wired that way.
gkitchens
Explorer
Sep 20, 2013
I am still not sure what this switch is supposed to do. Is there a way to tell if the switch is working or not?
Gary
chili_s_trip
Explorer II
Sep 20, 2013
Fiesta wrote:
MY '11 Bounder has a "ICC" switch about the same place. When you see truckers flash their lights after pulling back into the lane, after you flashed your lights, that maybe your switch. I think mine turns the back lights off when the headlights are "ON" and vice versa. Haven't used this switch yet on my "New To Me Bounder".

My 05 32W has this switch in the same location for the same purpose. Good luck.
Jack H
gkitchens
Explorer
Sep 20, 2013
The service bay lights have their own switch. I think I am just going to call Fleetwood and see if they can tell me what the switch is for.
Blackdiamond
Explorer
Sep 19, 2013
Might be the service bay lights (not luggage), engine, gen, batteries, dump valves.
workhardplayha1
Explorer
Sep 19, 2013
gkitchens wrote:
Thank you for the reply. I do not have fog lights. Do you think this is for fog light if you wanted to add them?

yes
gkitchens
Explorer
Sep 19, 2013
I will give it a try this weekend and see if in fact that is what the switch controls. Thanks for the information.
Fiesta
Explorer
Sep 19, 2013
MY '11 Bounder has a "ICC" switch about the same place. When you see truckers flash their lights after pulling back into the lane, after you flashed your lights, that maybe your switch. I think mine turns the back lights off when the headlights are "ON" and vice versa. Haven't used this switch yet on my "New To Me Bounder".
doxiemom11
Explorer II
Sep 19, 2013
Could it be for daytime running lights?
gkitchens
Explorer
Sep 19, 2013
Thank you for the reply. I do not have fog lights. Do you think this is for fog light if you wanted to add them?