8.1 Workhorse exhaust bolt broken
Have an 8.1 in an 05 Tiffin. Rear most pass side exhaust bolt broken below the mating surface. Any ideas w/o removing the head? Possibly have room to drill and tap not sure. Anyone ever use the KRAL b...
Forum Discussion
I try to weld a nut over the broken bolt/stud and twist it out. But, if you're broken too deep that option is out. It has worked 100% of the time for me. I tried it on a bigger bolt a couple of months ago with a stick welder. It didn't work. The MIG welder does a much better job.
