Atwood 6H6-6E water heater wont light
Hi I have a 91 Winnebago on a Ford F52 chassis. My Atwood water heater is an electronic start and all appears fine in that the system goes through the pilot on light for the required time then goes ...
Forum Discussion
I ran a separate ground wire from the circuit board area to the gas valve.
You can test the two coils in the gas valve. Each of the coils should read the same. Somewhere around 30 ohms. I would replace the gas valve assembly rather then trying to find coils.
You can test the two coils in the gas valve. Each of the coils should read the same. Somewhere around 30 ohms. I would replace the gas valve assembly rather then trying to find coils.
