Central VA, need wheel Alignment
I'm in the central part of Virginia,(that's middle of the state not Richmond) Anybody had any experience with an Alignment shop for Motor homes? 2015 Winnebago Adventurer 37F, want to get it done bef...
Forum Discussion
When you spend your money, don't settle for "OK it's aligned".
Get the before and after settings, in print.
Camber should not need adjusting. It requires bending of the axle.
Caster should be between 4 & 5 degrees positive.
Toe in should be at the maximum allowed positive.
Don't settle for "it's with in specifications".
I still do some alignment work when our local shop is over run with work and have many happy customers.
Richard
Get the before and after settings, in print.
Camber should not need adjusting. It requires bending of the axle.
Caster should be between 4 & 5 degrees positive.
Toe in should be at the maximum allowed positive.
Don't settle for "it's with in specifications".
I still do some alignment work when our local shop is over run with work and have many happy customers.
Richard
