Charger / Converter Failure / Recommendations
The charger / converter on my 2008 Winnebago Destination failed over this past trip. It is a Progressive Dynamics Intell-Power Model PD9260C Troubleshooting consisted of checking the outputs with ...
Forum Discussion
I have been using my PD9260C Converter/charger unit since around 2009 and have really put it through its paces...
Has worked flawlessly for me...
Since the PD9260C comes with the standard 120VAC plug I would plug it into a known good 120VAC receptacle source before saying it has failed.
Pretty easy to test as you have thus indicated. Just plug into a good 120VAC source and measure a nominal 13.6VDC on the DC output lugs.
I carry a B&D VEC1093DBD 40AMP portable smart mode battery charger (AMAZON) for all our off-road trips..
My 2KW Honda EU2000i runs this portable battery charger just fine when off the power grid...
Roy Ken
Has worked flawlessly for me...
Since the PD9260C comes with the standard 120VAC plug I would plug it into a known good 120VAC receptacle source before saying it has failed.
Pretty easy to test as you have thus indicated. Just plug into a good 120VAC source and measure a nominal 13.6VDC on the DC output lugs.
I carry a B&D VEC1093DBD 40AMP portable smart mode battery charger (AMAZON) for all our off-road trips..
My 2KW Honda EU2000i runs this portable battery charger just fine when off the power grid...
Roy Ken
