Class A DP Trailer Brake Controller Wiring
We have a 2009 Mandalay 43A, and I need to install a trailer brake controller. The rear of the coach has a seven-pin connector, but there's no controller up front. I realize unless you have the same c...
Forum Discussion
I bought an inertial sensing controller; no wire from the brakes lights required. Works great, very adjustable.
Under my dash, the excess loom was bunched together and bundled with lots of ty wraps. I had to cut all the ty wraps apart to find the brake harness. I also took the idiot light panel out and laid it on the dash which gave me much better access to the under dash wire harnesses.
I never would have found it by just looking up from the floor.
Under my dash, the excess loom was bunched together and bundled with lots of ty wraps. I had to cut all the ty wraps apart to find the brake harness. I also took the idiot light panel out and laid it on the dash which gave me much better access to the under dash wire harnesses.
I never would have found it by just looking up from the floor.
