Gas Range burner not working
Went to turn on the left rear burner on the range top - Wedgewood Vision 3 burner - and it would not light. The other two burners light just fine. There is plenty of propane and water heater also work...
Forum Discussion
You may have had a piece of crud (i.e.. rust) come down the propane line and partially plug the jet. That would explain the weak flame, and the yellow.
Don't know your stove, but normally there is one screw that will hold the burner and tube assembly to the stove. Remove the screw and gently pull the assembly away from the jet. Take a non metal object (like a tooth pick) and very gently open up the jet.
If you're into it, you can pull the jet out and shoot some carb cleaner threw it. Let it dry and replace it.
Don't know your stove, but normally there is one screw that will hold the burner and tube assembly to the stove. Remove the screw and gently pull the assembly away from the jet. Take a non metal object (like a tooth pick) and very gently open up the jet.
If you're into it, you can pull the jet out and shoot some carb cleaner threw it. Let it dry and replace it.
