How to inflate to 110 psi....
OK, I know it sounds stupid, but I am unable to add air to my tires using the aux air connection from the MH. I need 110psi, but I think the cut-in/cut-out psi will not allow me to add air as the pre...
Forum Discussion
I run the diesel engine until I hear the pressure relief valve pop off.
At that point I know it has at lease 130 lbs pressure in the tanks.
Only then do I start airing up a tire.
YOu should be able to go from 104 to 110 within a couple minutes.
If the compressor kicks in again, stop and wait until the pressure builds up again.
BUT, have you weighed the rig to see how much air is needed in your tires? You very well may not need 110.
At that point I know it has at lease 130 lbs pressure in the tanks.
Only then do I start airing up a tire.
YOu should be able to go from 104 to 110 within a couple minutes.
If the compressor kicks in again, stop and wait until the pressure builds up again.
BUT, have you weighed the rig to see how much air is needed in your tires? You very well may not need 110.
