I'm tearing up my hitch...Help!
Bought the hitch adapter to even out my trailer. With it on or off, I'm either beating my hitch post up, or dragging the rear of my cargo trailer. What can I do?
Forum Discussion
You will never be happy until you raise the hitch ball AND raise the trailer frame.
W=front tire
X=rear tire
Y=hitch ball
Z=Trailer tire
They aren't equally spaced but kinda close in dimensions.
The distance that W raises (Entering drive, etc) then Y will lower almost the same. Look at the top picture and it should be obvious
what is needed.
You would be fine if the distance between X and Y was half the
present distance.
W=front tire
X=rear tire
Y=hitch ball
Z=Trailer tire
They aren't equally spaced but kinda close in dimensions.
The distance that W raises (Entering drive, etc) then Y will lower almost the same. Look at the top picture and it should be obvious
what is needed.
You would be fine if the distance between X and Y was half the
present distance.
