Looking for a place to replace MH hydraulic jack in NC

Bill Plemmons RV World has a dealer in Raleigh and in one Winston-Salem. They are a RV full service dealers. I use the Winston-Salem dealer and recommend them. 336-377-2213 I have not been to the Raleigh location and do not have number.

me and friend replaced the curb side rear jack on this bounder in about 90mins
and most of the time was because we re-routed the hyd line, away from the leaf springs, had to cut some metal straps without damaging the line

found the jack on ebay

once you loosen and cap the hyd line
its just removing bolts and replacing the jack
then reconnect the hyd line

SAFETY FIRST
the jack must be retracted, before you start
you don't want to drop the RV on your head

Replacing the jacks is not that hard. Just takes some serious muscle power and a few tricks (Also depends on the jack)

Twin-Lakes Auto Body and RV in Seneca/Westminster SC likely can do it.

or check into mobile RV techs in your neighborhood. They come to you. Do the job in your own driveway or campsite.. Often less costly since they do not have a big SHOP to pay for .

One of the members frequently in here is a tech in NC, even if he cant help you, He should know who can. You can find him from the search bar.
Chris Bryant
He is located out in the west end of the state.

There is a camping world in Garner (last resort) but there are RV places in that area...also Campers Inn just off of 95 in Selma...Bill Plemmons RV in Raleigh...

Too bad you are not in the Outer Banks..Kitty Hawk Truck Repair would do it in a heartbeat...great people..reasonable..

look in the book for hydraulic repair shop.