LOOKING IN ALL THE WRONG PLACES
I am currently trying to find the metal frame that supports the walls of my 2008 Greyhawk. My spare tire is mounted on a four foot piece of 2" square tube welded to the back bumper. Of course this is ...
Forum Discussion
when I had my TT I wanted a place to haul my generator. I got 2 of the bumper bolt on receivers and about 6 ft of 2inch tubing. Bolted the receiver to the frame and then bolted the tubes thru the bumper/sewer hose carrier to the tubes Was very solid. You could do same thing and bolt to the receiver hitch for the secondary bolts. Run some tube down to the 2 inch tubing and weld/bolt together rather then try and bolt to unknown strength material in a wall. Remember that they are using LIGHT materials in walls and the walls are generally luan wood covered with a layer of fiberglass!
