Loss of 110

noleakman wrote:
also the on board charging system 110 is not charging either battery! But the batterys charge off the engine! no buttons on inverter!

Odds are the INCOMING 120 voltage from your 120 breaker panel is NOT supplying the 120 to the Inverter/Charger. There is an access plate on the inverter/charger that covers the Input and output 120 wiring. Take that plate off and use a voltmeter to verify the INCOMING 120 wires HAVE 120 volts. IF they do NOT, then backtrack to the main 120 breaker panel and verify all breakers have 120 volt output. If you do HAVE 120 volts to the input connections on the Inverter/Charger, then the circuit board for the Inverter is bad. 13 year old Inverter, I would replace instead of paying to fix. Doug

also the on board charging system 110 is not charging either battery! But the batterys charge off the engine! no buttons on inverter!

also the on board charging system 110 is not charging either battery! But the batterys charge off the engine!

pianotuna wrote:
The "phone wires" may be for a remote control for the inverter.

He has 2 Phone type communication wires. One for the remote panel and one for the Battery temp sensor. Doug

The "phone wires" may be for a remote control for the inverter.

All I have when I open the compartment the inverter in front of me one button that says 15 looks like amp's the management panel is on the left wall! What are the phone looking wires that are plugged in the front of the box there?

To test, bypass the inverter.

The Xantrex 458 inverter has it's own circuit breakers. Mine were on the front on the Xantrex inverter in the basement compartment. These are not on the inverter control panel and have nothing to do with the generator or other main electrical panel. They must be physically reset by opening the compartment where the Xantrx inverter is located and manually resetting the circuit breakers.

1. The SUPPLY 120 line to the Inverter, breaker has tripped
2. The Inverter has an internal 120 transfer relay---It has failed, hence you have power when the Inverter is ON
3. SOME of the Freedoms have 2 breakers ON the Inverter, one or both have tripped.
4. 1,2,3 are the only possibilities. Doug

Yes all GFIs reset!The boxs and TVs have there own circuit for invertor power and straight power from generator!