enblethen wrote:
tderonne:
That is almost the same drawing I was looking at.
Main difference it show on the drawing I was looking at F1-10 feeds the low beams and DRL.
Jumper from F1-27 only feeds the high beams plus passing light
K53 is for DRL and low beam switching.
Still looks like blown fuse F1-10.
as shown/posted a couple times there are *TWO* 10 amp fuses one for left low beam and one for right low beam
chances of the OP having two blown 10 amps fuses are pretty remote
I think headlite relay or switch as most likely or misdiagnosed H/L switch