Lubing rear avle
just finished greasing front axle, any handy advise for elevating rear axle for easier access? thought I'd find something elevated I could drive onto to lift rear wheels so I could crawl underneath ea...
Forum Discussion
rsilvestrone wrote:
Thanks everyone for input, got some heavy duty scrap wood from homebuilders around here & drove rear wheels up on blocks, had plenty of room then to wiggle around,Othertonka sorry not the wheel bearings its the grease fittings, located on axles, & driveshaft. they can be greased with grease gun & #2 heavy duty chassis grease ( at any auto store) thanks all, Robert Bozeman, Mt
the grease fittings are not the axle per say.There the brake cams and the slack ajusters plus ujoints and the slip yoke.I have a 2008 Bus and there is plenty of room to lay on the ground with a tarp
Actually I just did it a few days ago.One can put the jacks down on spacers and lift it up a few inches if your personally a little on the big side
