Maybe transfer switch bad?
I didn't want to hijack the other thread running on transfer switch. 1999 Monaco Diplomat. The inverter shows 30 amps when connected to 50 amps. I have zone 1 and zone 2 on thermostat. I should be...
Forum Discussion
dougrainer wrote:
He has the Intellitec system and when on 30 amp will NOT allow power to the REAR AC. Your INVERTER is NOT showing 30 amp. Your EMS panel is showing 30 amp. Doug
True, but not accurate. When my Intellitec is connected to 30a via an adapter I can run both ACs. When I was missing one leg because my 50a cord was hosed, the EMS still
showed 30 a on the panel but the 2nd (rear AC) would not work.
My thinking is that if you are plugged into 50a service improperly wired to two legs of the same phase, Inteelitec would show 30 and both ACs would work.
Please let us know what u find.
