Need drop receiver and receiver extension
Just bought a Class C, and I'm planning on towing an '03 Jeep Wrangler. Have the base plate on, got it wired, bought a Demco tow bar, and now the issue. The RV is way low, and the jeep is way high. ...
Forum Discussion
lthrneck689 wrote:You might find a longer power cord on Ebay priced cheap enough. The one I am using is generally quite expensive.
Thank you, Ron - really appreciate the heads-up. I've heard and read some real horror stories. My service tech warned me about backing even an inch. Regarding the power cable, I'm toying with the idea of splicing about 6 inches into the middle of it.
I've had boats for 30 years and there was always something to keep me busy. This is really no difference, except you can't sink!
Do you have the 6+1 pin cable, or the generic 4-pin? I used to have a blue colored 4-pin for the MR2 which did not have a tow brake. I bought the red coiled 6+1 cable for the Liberty, the one seen in my previous picture higher in this thread. The coiled one works real well hooking it on and around things as not to sag yet flex as needed during the turns. It also offers good strain relief.
