Norcold 1200 throws GFCI when starting
Turned on the fridge for the 1st time this season, and it keeps popping the GFCI. All the electrical wiring and plugs seem good on the circuit, runs on LP but throws reset on AC. Could there be a prob...
Forum Discussion
Old-Biscuit wrote:
Norcold 1200 has 2 (TWO) elements......225W each
Need to replace both.
Can be done from lower vent opening
Unplug leads on control module......pull elements up out of sleeves.
May need to wiggle back/forth to loosen
Small access door held in place via a tab. Bend tab then squeeze housing to unlock tab from door slot. Lift door slightly up and then out.
I was told, to Plug the the color leads in exactly where the old ones came out.
