Be sure to check the GFI outlet that covers your internal 110.
I've lost the 110 fuse twice in three years. Remove the outside cover, on the upper left you will see a black cover. Take a photo or draw a diagram to get the wires back in the correct place. Once the cover is removed you will see the old fashioned, bus, tube type fuse. It is likely the panel is hot so don't start poking around. Using a tester you can test the fuse on both sides to determine if your getting 110 through the system. If not pull the plugs, and replace the fuse. If you show 110 the next step is the board.
Let us know