OH BOY OH BOY OH BOY OH BOY PD4501 now mine
I have been pining for a Scenicruiser for years and yesterday I got one. #149 is now mine. It will need a fair amount of work but There are so few of them left that I couldn't walk away. No...
Forum Discussion
Tony, thanks for the link.
The Radius Rods I am rebuilding are massive and somewhat unique. The one shown is splined half way through and matches splines on the 1 inch bolt and the attachment plate. On the other end of the rod the center piece has a tapered hole that matches the tapered pin on the bus frame. In order to use any other rods I would have to modify the attachment points on the axle and the bus. I hope to avoid that by rebuilding the original bushings with more modern materials. If they work, they should last longer than I will.
The Radius Rods I am rebuilding are massive and somewhat unique. The one shown is splined half way through and matches splines on the 1 inch bolt and the attachment plate. On the other end of the rod the center piece has a tapered hole that matches the tapered pin on the bus frame. In order to use any other rods I would have to modify the attachment points on the axle and the bus. I hope to avoid that by rebuilding the original bushings with more modern materials. If they work, they should last longer than I will.
