gatorcq wrote:
Yes you can do it your self, especially if you are only doing the outside.
Normally there are 2 seals, 1 on the slide itself and the other on the outside rail.
Use NAPA brake fluid to clean off the adhesive residual. I also used a Harbor Freight vibrating tool to remove the old seal.
I first locked my awning in place, then remove it and placed it on the roof of the RV. Once you are ready, all you have to do is remove the paper backing and press the seal in place.
In the corners you can use screws to hold in place. Please do not let people scare you from doing a easy job. It is all about the prep work and cleaning.
The bedroom slide took me 3 hours. The large living room slide I got it down to 2 hours.
What makes you think HIS seal is identical to yours:@ His does NOT glue on. Doug