Thermal Sensor (For Norcold Refrigerator)

Are you talking about the thermistor that usually clippes to the fins over on the right side? If so, you can buy better after market ones that are adjustable. I bought & installed one several months ago. If that's what you're looking for, let me know and I'll find the vendor for you. They're in AZ.

Bill

goggle the number and you will find a place that sells the part.

Cottontop I did google the number. I think I heard someone say they wouldn't sale it to a private party, cause they wanted it checked out. Roy

To clarify, you are talking about the fail safe cutoff box in the rear of the fridge, correct?

If that's the one then you need to find a shop that NORCOLD has certified to service it, and your tech should know that.

SCVJeff wrote:
To clarify, you are talking about the fail safe cutoff box in the rear of the fridge, correct?

If that's the one then you need to find a shop that NORCOLD has certified to service it, and your tech should know that.

Exactly.......

Norcold or DOmetic don't sell their 'recall kits' or parts for recall kits to public.
Authorized Service can probably order what you need or may have one from old kit
(Mobile RV Techs did a lot of installation of those recall kits)

When you goggled you should have seen this........LINK

And they are now up to REV E (or maybe it's F)


Thought you posted got fridge working...........how did you do that :H

The new owner of the MH needs to call Norcold letting them know their recall box stopped working and they need a new one... Rev E or F. Norcold should have a local dealer install the new/revised one for free as part of the recall on the 1200s.

This will be interesting to see how it works out.
1. Norcold does NOT sell the 1200 recall kit
2. IF the recall has been done and the recall kit fails, the RV'er has to pay a check out fee (usually 1/2 hour) for the Service center to verify the Recall kit did not fail for cause. IF the recall kit did not fail for cause, Norcold will send another Kit for free, BUT, the Labor will not be free. The RV'er must pay for the labor(1/2 hour).
3. Norcold will NOT just send a Recall kit after the kit has already been done until the refer has been professionally checked out. Doug

Old-Biscuit, I by passed the Sensor to see if that was the problem, this was done just to check it out, I will not operate the Ref. until I get the new Sensor. Roy

ROYBUCK wrote:
Old-Biscuit, I by passed the Sensor to see if that was the problem, this was done just to check it out, I will not operate the Ref. until I get the new Sensor. Roy

Thought new owner drove away with it last week....

Anyway as mentioned in other posts and by doug in this one

Contact NORCOLD

Old-Biscuit: The owner did drive away with the MH, I told him I would get it fixed before he took it, but he wanted it then, I promised him I would take care of it, so I am trying to find the Sensor, if it means taking it to a service center I will do that. I told him I would take care of it, and I will. Roy