Forum Discussion

RicoSuave's avatar
RicoSuave
Explorer
Aug 22, 2018

What are you towing with your Sprinter?

We have been considering downsizing from a 35ft. Class A to a Sprinter based Class C. We are currently towing a 2008 Jeep Wrangler 2 door I purchased specifically to tow.
My concern is with the weight of the Wrangler and the towing capacity of the Sprinter: GCWR of 15,250 and GVWR of 11,030 for a 2019 Thor 4 Winds 24BL. That leaves little reserve for a 4000lb toad. I am wondering what others are towing but most importantly who may be towing a Wrangler and if any problems or issues have surfaced as a result.
  • I was looking at a Via and I wanted to pull a Jeep Rubicon at 4500 pounds. I called Winnebago to confirm, but even though it has a 5K hitch, it is not rated to pull 4500 pounds and Winnebago does not recommend it. GCWR - GVWR is the maximum you can tow.
  • We have a Sprinter chassis class C. It is a delight to drive, but carrying capacity in pounds is not the only problem: storage space is minimal.
    We travel often for NOMADS projects. There is no way our tools would fit in the small class C.
  • The GCWR and GVWR are correct for ANY model/brand built on the Sprinter chassis. Different manufacturers will have differing tow capacities. Our Coachmen Prism has a 5000# hitch, BUT due to the frame extension it is mounted on they drop the tow capacity to 3500#. That said, as noted below we drsg around about 3200#'s of Suby Forester - it handles that just fine. Mileage-wise I get about 15+ mpg with the toad, and almost 16.5 without it, so really not too much of a "drag" on the system. But you do need to watch manufacturers weight ratings...
  • I am fairly sure the Sprinter will tow the Jeep just fine.....but I am also certain that if you are involved in an accident, your insurance will use the out of spec tow weight against you.