What did you do to your Class A MH today???
This is always a fun thread to watch, so I thought I would start one here.
Forum Discussion
Hi
After a month working on other stuff I re installed the repaired HWH jack brain and controller and noticed that one of my recently rebuilt jacks is showing a not retracted light even though it is all the way up. I removed all the plastic vent and other covers from the roof. I Scraped potty, cleaned and Eternabonded part of the roof in preparation for Liquid Rubber. O removed the ladder screws since I feared water damage beneath and found that it was only just starting and that I was fine. I pumped Epoxy in the holes and coated the area underneath the rubber anyway. I unbolted the A/C in preparation for raising it to coat under it. Then I looked at the Generator to see why it is getting loud. Airbox is breaking and either the exhaust is shot or a gasket on the exhaust is bad. Decided to wait. That was yesterday actually.
After a month working on other stuff I re installed the repaired HWH jack brain and controller and noticed that one of my recently rebuilt jacks is showing a not retracted light even though it is all the way up. I removed all the plastic vent and other covers from the roof. I Scraped potty, cleaned and Eternabonded part of the roof in preparation for Liquid Rubber. O removed the ladder screws since I feared water damage beneath and found that it was only just starting and that I was fine. I pumped Epoxy in the holes and coated the area underneath the rubber anyway. I unbolted the A/C in preparation for raising it to coat under it. Then I looked at the Generator to see why it is getting loud. Airbox is breaking and either the exhaust is shot or a gasket on the exhaust is bad. Decided to wait. That was yesterday actually.
