Bill.Satellite wrote:
It makes no difference whether you are Dish or DirecTV, the wiring will be exactly the same.
You will need only one coax cable running to each receiver so the coax you have now should already go where a receiver is expected to be.
Not quite. If you have DISH, I'd suggest running RG6 cable to all
three of the LNB ports on the Travler (labeled "A", "B", and "C") + running the Winegard controller cable.
While you might just need one of those RG6 cables at the moment, running all three gives you more options for the future -- and it's easier to do it when you 1st install a Travler.
