Winnebago Warrior furnace pooped out
Hi All. A little background- I bought a one owner 1990 Winnie Warrior on a Toyota chassis. It's a 1 owner but the owner that survived the other was a woman who parked it for 3 years. That in itself c...
Forum Discussion
some progress. I removed the unit and tried direct 12V input to the motor and it runs. I followed both red and black wires. Black goes somewhere besides the relay (I'll ck the diagram) and applying voltage to it all the way to the splice while connecting the red to power no farther than one side of the relay, the motor ran. On the other side of the relay the red is dead. From the relay the red goes to the breaker and I jumped that and nothing. So it seems the relay is bad, yes? I'd really appreciate some feedback before I buy and install a new one thought that's not much of an issue (I hope).
Many thanks again to all! Knowledge in numbers and knowledge is power!
Many thanks again to all! Knowledge in numbers and knowledge is power!
