locoduck
Jun 04, 2013Explorer
Cable TV @ Campgrounds
When I check in they give me a list of channels availble... But when I hook up with coax I only get channels 2 thru 13... Do I need some kind of cable box or something else??? Thank you
Johno02 wrote:This is the correct answer. You go into your televisions setup menu and set the imput to "cable" Then you will probably need to run the "scan for channels" program. This will fix your problem. The channels above 13 are not scrambled, you just need to set your Television to the proper imput to find them. "Antenna" and "Cable" are different imputs because they are very different signals above channel 13.
Change your TV from antenna to cable. Antenna only had VHF channels 2-13 at one time, so that is all it will tune. Change TV to cable and it should fix your problem.
locoduck wrote:Thats because you are looking at cable formatted carriers (who's acronyms escape me.. been too long) where the carriers above 13 are offset enough that the tuner in OTA (antenna) mode cannot properly tune them. If these were QAM or ATSC carriers (both digital), you wouldn't know they were even there since they look almost exactly like noise.
Thanks for your reply... I get the other channels but they are scrambled or not viewable...
wkswenson wrote:
With a change in the laws more cable systems are scrambling all channels for transmission. You need a QAM capable tuner on the TV to actually receive the channels.
Do a google search on QAM and you will get additional details.
locoduck wrote:
Thanks for your reply... I get the other channels but they are scrambled or not viewable...