Forum Discussion
2oldman
Jun 04, 2013Explorer II
i'm using the one with the bars that shows only 1 transducer (transponder) at a time, not the screen that shows all the transducers at onceOk, but I still suggest using the other screen.
the receiver was just taken from the house where it's been for awhile so i'm assuming software is up to date.If it was operational in the last few days, it should be. But, if you're experiencing constant reboots, it's not.
You will not only have to have a good signal, you will have to have the guide loaded to stop the reboots. Good luck.
the receiver was just taken from the house where it's been for awhile so i'm assuming software is up to date.If it was operational in the last few days, it should be. But, if you're experiencing constant reboots, it's not.
You will not only have to have a good signal, you will have to have the guide loaded to stop the reboots. Good luck.
About RV Must Haves
Have a product you cannot live without? Share it with the community!8,793 PostsLatest Activity: Aug 22, 2023