Ethernet (RJ45) Jack on 5th wheel sidewall
Hi all, I use a ubiquiti nanostation as a wifi repeater in my 5th wheel. I have the nanostation mounted on a piece of 1" PVC conduit so I can remove it for travel. Long story short, I want to put...
Forum Discussion
Just wanted to give you guys an update on this. I wound up getting a 4" X 4" plate of aluminum and mounting my waterproof RJ45 connector to it after I painted it. I drilled a 1-3/4" hole through the side of my 5er. This hole is on the side near the rear and the back side is actually in the cabinet for my entertainment center. I put putty tape on the plte and screwed it to the outside of the camper. On the inside I put one of those desk grommets to give it a more finished look. I got a whole set of those grommets off of ebay for about 5 bucks. All in all I am very happy with how it turned out. Here are some pictures:
Steve
Steve
