Powered antenna receptacle
While I'm hoping to get the SensarPro in my stocking this year, in case I don't I'm wanting to understand what's going on with my new to me RV. The coax receptacle on the wall had 2 coax wires hang...
Forum Discussion
rooney77 wrote:
Thanks. Never really "aimed" it before. Just always did the trial and error scan, turn, repeat method. A little reading here and I've realized the err of my ways.
That's how I did it too before the Sensor Pro, and it's easier if your TV has a good signal strength meter. The one in the bedroom does and the main TV does not.
One head's up on installing the Sensor Pro; you might have to slightly enlarge the hole in goes into and use the included adapter plate. That was my situation and I used the adapter plate as a template and trimmed the thin wood paneling with a razor knife. Trimming the paneling took longer than hooking up the Sensor Pro, which takes about 2 minutes if you've never done it before! So far it works as advertised!
