http://i930.photobucket.com/albums/ad143/gonzo1942/DSC01029.jpgI have a satellite antenna exactly like the one on my roof at home. In order to make aiming easier, I modified the antenna and the tripod I got on eBay.Antenna elevation:Antenna azimuth:http://s930.photobucket.com/user/gonzo1942/media/DSC01028.jpg.htmlAlso I built a shelf over the TV for the Receiver and a Video switch.The video switch eliminates the need for dismounting the TV for access to the input jacks. The strap holds the receiver down.

You're going to have to use the "links to share this photo" on your photo page. Like this (direct url):

Sorry about that. I was trying to insert the photos for the very first time. I need to learn how better.OK, so I got the links there but not the images themselves.

Use the "Advance post form"Click on the image icon, and put your image address link in the boxSet width between 640~800Or for manual entry use the image cmd in front of and behind your link address[ img ] Your link width=700 [/ img ] No spaces inside the cmd brackets

My "no tools required" dish setup mods look like this:The low cost tripod legs have also been modified to include levelers:

I like the elevation adjustment, Not sure the azimuth is that critical but I'm used to setting manually to less than 1/2 degree so .....

Satellite Antenna modifications | Good Sam Community

12 Replies

nomad297
Explorer
Feb 17, 2014
schneid wrote:
Lots of setup and time-savers at TV4RV.com. Many you can DIY. Often easier to buy from him rather than scour the web.

X2
Jagtech
Explorer
Feb 15, 2014
I really like that design idea!!! Thanks!
Dutch_12078
Explorer II
Feb 15, 2014
Horizon170 wrote:
Got my new 1000.4 EA unit today and it has the elevation screw adjustment. Now I need to devise an azimuth adjustment although I may not need it. Still waiting on my WA LNB.

I've never needed to use the azimuth fine tuning cam on my 1000.4 mount. I've always been able to tweak it enough by just bumping it a bit until I find the sweet spot.
schneid
Explorer
Feb 14, 2014
Lots of setup and time-savers at TV4RV.com. Many you can DIY. Often easier to buy from him rather than scour the web.
Horizon170
Explorer
Feb 14, 2014
Got my new 1000.4 EA unit today and it has the elevation screw adjustment. Now I need to devise an azimuth adjustment although I may not need it. Still waiting on my WA LNB.
Gonzo42
Explorer
Feb 14, 2014
Yes, the elevation was the more important for me as it is front-heavy and required muscling into position against the weight. Then there was always some sag with which to contend. But as long as I was going to do one, I might as well do both. What I didn't show was I added a ring screw to the bottom of the shaft in case I want to add a weight when there is wind.
Horizon170
Explorer
Feb 13, 2014
Wow, you all have made it easy for me. Thanks for the brilliant ideas. I came up with a way to plumb my staff but I doubt anyone else could benefit from it as mine is mounted to the side of RV.
wa8yxm
Explorer III
Feb 13, 2014
I like the elevation adjustment, Not sure the azimuth is that critical but I'm used to setting manually to less than 1/2 degree so .....
Dutch_12078
Explorer II
Feb 13, 2014
My "no tools required" dish setup mods look like this:

The low cost tripod legs have also been modified to include levelers:
MrWizard
Moderator
Feb 13, 2014
Use the "Advance post form"
Click on the image icon, and put your image address link in the box
Set width between 640~800

Or for manual entry use the image cmd in front of and behind your link address
[ img ] Your link width=700 [/ img ]
No spaces inside the cmd brackets