wa8yxm wrote:
Dutch_12078 wrote:
I suspect you may have a defective SensarPro. Ours has worked quite well in bringing in signals in some previously problematic areas. In some locations, I've even had to turn down the gain to keep from over driving the TV.
I see 3 possibilities. And that is #1
#2 is you hooked it up wrong (Wrong coax connections)
#3 is you hooked the 12 volt wires backwards way way down the page I might add
My Expierence, like others was the reverse
Stations I could barely get.. Strong and clear now
Stations I could not even see, Strong and clear now
Some stations I could not see.. Iffy.. but hey, before I could not even tell they were there.
No on #2 and No on #3. I'm also thinking now probably no on #1.